install php shield in phpmotion

Installing phpShield Loaders
The first thing we need to do is check a couple of PHP settings. The easiest way to do this is with a phpinfo file. If you don't know how to create a phpinfo file, you can
Now that you have a php info file, upload it to your website's public_html directory and view it in your browser by typing http://www.yoursite.com/phpinfo.php in your address bar. You want to find/verify the following in your phpinfo.php file:Your PHP version
Thread Safety is disabled
enable_dl is set to on
The path to your extension_dir
Path to your php.ini file
Now connect to your webserver using your favorite SSH client and login as root.
Create a new working directory then change directories:

mkdir ~/phpshield cd ~/phpshield

Download the phpSHIELD loaders:

wget http://phpshield.com/loaders/phpshield.loaders.linux.zip

or if you have a 64 bit OS (most people will have a 32 bit OS so you will most likely use the code above)

wget http://phpshield.com/loaders/phpshield.loaders.linux-64.zip

Extract the loaders:

unzip phpshield.loaders.linux.zip

If you do a directory list: ls

you will see a bunch of files named phpshield.4.3.lin to phpshield.5.2.lin

. What we want to do here is find the phpshield file with the number that matches your PHP version. You can find your PHP version at the very top of your phpinfo file from earlier.
Now we need to copy the appropriate phpshield loader file to your PHP extensions directory.

cp ~/phpshield/phpshield.x.x.lin /path/to/your/php/extensions/directory

Replace x.x above with your PHP version and use the path to your PHP extensions directory (you should have found this in step 2 above.)

Open your php.ini file

nano /path/to/php/ini/php.ini

 

You should have found the path to your php.ini file in your phpinfo.php file from earlier.

Append the following to the Dynamic Extensions section of your php.ini file:

extension=phpshield/phpshield.x.x.lin

Replace x.x with the number on the phpshield file you moved earlier.

Finally, restart httpd: /etc/rc.d/init.d/httpd restart

func setlocale(ru_RU.CP1251) php

func setlocale(ru_RU.CP1251)

 

localedef --no-archive -c -i ru_RU -f CP1251 ru_RU.cp1251

How to enable/Disable cPanel webmail interface for a user account or in server.

How to enable/Disable cPanel webmail interface for a user account or in server.

Customer wants to enable only the HORDE webmail interface for his domain and disable the rest. Usually there are three (3) webmail clients (horde, squirrel mail, roundcube). However, I was advised to make sure that a specific customer does not see more than one specified. I enabled “AUTOLOAD” option in the webmail interface but he is not satisfied. He came back asking to allow only HORDE interface for his webmail. How should i do that?

Solution: Consider my domain name is “hemanth.com” and my account name is “hemanth“. Now follow the steps below.

====================This option for that particular user account:
1) SSH to your server
2) Go to “cd /var/cpanel/users/”
3) vi hemanth
4) Paste the following lines
skiphorde=0
skipsqmail=1
skiprcmail=1

Note: The option 0 is enable and 1 is disable. in above line only HORDE is enabled in the webmail and Roundcube and squirrel  is disabled.

5) Then restart the cpanel service
/etc/init.d/cpanel restart

Now login to your webmail and check for the option.

This will change the server wide for all the domains in the server:
1) Login to your WHM
2) Go to “Server Configuration”
3) Click on “Tweak Settings”
4) Select mail option.
5) Turn off “Round Cube and Squirrel”
6) Save it.====================Redirections

http://your-domain.com:2095/3rdparty/roundcube/index.php
http://your-domain.com:2095/horde/login.php

http://your-domain.com:2095/3rdparty/squirrelmail/src/login.php

Note: You must replace your-domain.com with your actual domain name in the above examples.

Php.ini using .htaccess

http://www.suphp.org/DocumentationView.html?file=apache/CONFIG

if you want to use "/path/to/server/config/php.ini", use
"suPHP_ConfigPath /path/to/server/config".

in .htaccess

Htop installation

Htop is an interactive and real time process monitoring application for Linux. It shows complete list of processes running and easy to use for normal tasks. We can interact with mouse those who love to play with mouse. You can scroll vertically to view the full process list, and scroll horizontally to view the full command line of the process.

Install Htop from source

Download the htop source from : http://sourceforge.net/projects/htop/

cd /usr/src/
wget http://downloads.sourceforge.net/project/htop/htop/0.8.3/htop-0.8.3.tar.gz?r=http%3A%2F%2Fsourceforge.net%2Fprojects%2Fhtop%2F&ts=1283665168&use_mirror=cdnetworks-kr-2tar zxvf htop-0.8.3.tar.gz
cd htop-0.8.3
./configure
yum install ncurses-devel
make all
make install

Htop installation on 64bit centos version 6 RPM Package

wget http://apt.sw.be/redhat/el6/en/x86_64/rpmforge/RPMS/htop-0.9-1.el6.rf.x86_64.rpm
rpm -i htop-0.9-1.el6.rf.x86_64.rpm

Htop installation on 32bit centos version 6 RPM Package

wget http://apt.sw.be/redhat/el6/en/i386/rpmforge/RPMS/htop-0.9-1.el6.rf.i686.rpm
rpm -i htop-0.9-1.el6.rf.i686.rpm

Htop installation on 64bit centos RPM Package

and if your linux centos version is 64bit use this instead:

wget http://packages.sw.be/htop/htop-0.8.3-1.el5.rf.x86_64.rpm
rpm -i htop-0.8.3-1.el5.rf.x86_64.rpm

Htop Installation on 32bit Centos RPM Package

wget http://packages.sw.be/htop/htop-0.8.3-1.rh9.rf.i386.rpm
rpm -i htop-0.8.3-1.rh9.rf.i386.rpm

yum install htop*

How to Use htop

for using htop you can simply run htop command

htop

also there are some other options for example the delay time that is -d

htop -d 2

That the above will delay the refresh time to 2 seconds

To list only the specific user in the system try -u for exampe : htop -u apache (will list only the process run by the apache user)

MailMon installtion

cd /usr/src/
wget http://www.mycutelife.net/sanju/newt...mon_1-3.tar.gz
tar -xvzf mailmon_1-3.tar.gz
cd /usr/src/MailMon
cp -f /usr/sbin/sendmail /usr/sbin/mon.bkp
wget http://www.mycutelife.net/sanju/newt...on/mailmon.new
sed -e s/opteron.dnsprotect.com/$hostname/g mailmon.new > mailmon.temp;
cp -f mailmon.temp /usr/sbin/sendmail
cd /usr/sbin
chown root.mailtrap sendmail
chmod 755 sendmail
chattr +i sendmail
cd /var/log
touch mailmon.log
chmod 622 mailmon.log
touch mailmon.junk
chmod 622 mailmon.junk
mysql
mysql>create database mailmon2005;
mysql>grant all privileges on mailmon2005.* to mailmon2005@localhost identified by '123dsa';
mysql>use mailmon2005;
CREATE TABLE `limits` (
`id` int(11) NOT NULL auto_increment,
`user` varchar(20) NOT NULL default '',
`speedlimit` int(11) NOT NULL default '0',
`seconds` int(11) NOT NULL default '0',
PRIMARY KEY (`id`)
) TYPE=MyISAM AUTO_INCREMENT=6 ;
INSERT INTO `limits` VALUES (6, 'cpanel', 200, 3600);
CREATE TABLE `mailmon` (
`user` varchar(20) NOT NULL default '',
`timestamp` int(10) unsigned NOT NULL default '0',
`script_name` varchar(255) NOT NULL default '',
KEY `user` (`user`,`timestamp`)
) TYPE=MyISAM;
mysql> quit;

Mysql -> add/drop/grant/revoke/backup/restore.

mysql -u <username> -p
Enter password:

Create database command:
--------------------------------

mysql> CREATE DATABASE <database>;

eg:

mysql> CREATE DATABASE ACCOUNTS;


We can now check for the presence of this database by typing:

mysql> SHOW DATABASES;

+-------------+
| Database |
+-------------+
| mysql |
| accounts |
+-------------+

USE Database:
-----------------

The USE db_name statement tells MySQL to use the db_name database as the default (current) database for subsequent statements. The database remains the default until the end of the session or until another USE statement is issued:

mysql> USE accounts;
mysql> SELECT COUNT(*) FROM mytable; # selects from db1.mytable
mysql> USE sales;
mysql> SELECT COUNT(*) FROM mytable; # selects from db2.mytable

Making a particular database current by means of the USE statement does not preclude you from accessing tables in other databases. The following example accesses the author table from the db1 database and the editor table from the db2 database:

mysql> USE accounts;
mysql> SELECT author_name,editor_name FROM author,sales.editor
-> WHERE author.editor_id = sales.editor.editor_id;



Delete / Remove database command:
--------------------------------------------

DROP DATABASE <database>

eg:

DROP DATABASE accounts;


Granting Privileges on the new database:
-----------------------------------------------

mysql> GRANT ALL PRIVILEGES ON DatabaseName.* TO Username@localhost

or

mysql> GRANT ALL PRIVILEGES ON DatabaseName.* TO Username@localhost IDENTIFIED BY 'newpassword';

mysql> GRANT SELECT,INSERT,UPDATE,DELETE ON vworks.* TO newuser@localhost IDENTIFIED BY 'newpassword';


mysql> GRANT ALL PRIVILEGES ON DatabaseName.* TO Username@192.168.0.2 IDENTIFIED BY 'newpassword';

Now a user on the machine '192.168.0.2' can connect to the database. To allow a user to connect from anywhere you would use a wildcard '%'

mysql> GRANT ALL PRIVILEGES ON DatabaseName.* TO Username@localhost IDENTIFIED BY 'newpassword' WITH GRANT OPTION;

This would allow the user 'newuser' to log into the database and give their friend privileges to SELECT,INSERT,UPDATE or DELETE from the database.


REVOKING Privileges:
-------------------------

For example to REVOKE the privileges assigned to a user called 'user1':

mysql> REVOKE ALL PRIVILEGES ON DATABASENAME.* FROM user1@localhost;

Or just to remove UPDATE, INSERT and DELETE privileges to that data cannot be changed.

mysql> REVOKE INSERT,UPDATE,DELETE ON DATABASENAME.* FROM user1@localhost;


Backing Up DataBase:
-------------------------

mysqlhotcopy -u <username> -p <database> /backup/location/


Which SHOULD copy all the tables (*.frm, *.MYI, *.MYD) into the new directory - the script does require the DBI perl module though. To restore these backup files simply copy them back into your MySQL data directory.


This is my preferred method of backing up. This outputs the table structure and data in series of SQL commands stored in a text file. The simplified syntax is

mysqldump -u <username> -p <database> > file.sql

eg:

mysqldump -u user1 -p accounts > dump.sql


Restoring a DataBase from Dump:
---------------------------------------

mysqldump -u <username> -p <database> < file.sql

eg:

mysqldump -u user1 -p accounts < dump.sql