Pages

Monday, October 12, 2015

AWS S3 : Limiting Access from Certain IP's

We need to our nodes to connect to S3 from a single IP address, an elastic IP attached to our gateway node.

So - based on this design, we needed a way to only allow access to a set of buckets from this single IP address. For example purposes we are using the IP of 72.309.38.2.

IF you were to follow the initial example laid out by the AWS documentation - you’ll end up with a policy that probably looks similar to this.

{
    "Id": "S3PolicyId1",
    "Statement": [
        {
            "Sid": "IPAllow",
            "Effect": "Allow",
            "Principal": {
                "AWS": "*"
            },
            "Action": "s3:*",
            "Resource": "arn:aws:s3:::my-wicked-awesome-bucket/*",
            "Condition": {
                "IpAddress": {
                    "aws:SourceIp": "72.309.38.2/32"
                }
            }
        }
    ]
}

What you’re going to find, after banging your head on the table a few times, is that this policy does not work. There does not appear to be an implied deny rule with S3 buckets (similar to how IAM access policies are setup). I did my testing with the s3-curl command - When you have that tool setup - you can make a query like the following:


./s3curl.pl --head --id=AKIAYOURACCESSKEY --key=YourSecretKey -- https://s3.amazonaws.com/my-wicked-awesome-bucket/even-more-awesome.file
Using the policy above - returned this:

HTTP/1.1 200 OK
x-amz-id-2: BLPqeibX8nZGnSDNi9zRhb+6a8fDiOW6Ij1OXhadWknJKCX9WAb7x1xNETvdXAEv
x-amz-request-id: F6AF36D912E6003B
Date: Fri, 27 Apr 2012 00:25:52 GMT
Last-Modified: Tue, 17 Apr 2012 17:50:11 GMT
ETag: "8553074962ba71d8b2b600b971ba80a8"
Accept-Ranges: bytes
Content-Type: application/pdf
Content-Length: 1451065
Server: AmazonS3
After troubleshooting this with the AWS support team - they let me know of the following:

By default accounts are restricted from accessing S3 unless they have been given access via policy. However, S3 is designed by default to allow any IP address access. So to block IP's you would have to specify denies explicitly in the policy instead of allows.

Once I learned this - the policy was easy to adjust. I flipped around the policy from allowing access from only my IP address to denying access from everywhere that was NOT my IP address.

My new policy looked like this:

{
    "Id": "S3PolicyId1",
    "Statement": [
        {
            "Sid": "IPDeny",
            "Effect": "Deny",
            "Principal": {
                "AWS": "*"
            },
            "Action": "s3:*",
            "Resource": "arn:aws:s3:::my-wicked-awesome-bucket/*",
            "Condition": {
                "NotIpAddress": {
                    "aws:SourceIp": "72.309.38.2/32"
                }
            }
        }
    ]
}

And when I ran my s3-curl command again - I now received the following response.

HTTP/1.1 403 Forbidden
x-amz-request-id: 3B90483F655AA692
x-amz-id-2: 0XEO2miEzZEwbU2N5zPwzLtX4J7BJx/LLXpvSLPpQ7e2wuocx49katsD+ZcqwYA7
Content-Type: application/xml
Transfer-Encoding: chunked
Date: Fri, 27 Apr 2012 00:27:14 GMT
Server: AmazonS3

Saturday, August 15, 2015

Configure MySql and ODBC Connector In Windows 2012 Server

Installing MySql and its ODBC Connector In the Windows 2012 Server

Download The Microsoft Visual C++ 2010 Redistributable
http://www.microsoft.com/en-gb/download/details.aspx?id=14632

Download and install the ODBC Connector
http://cdn.mysql.com/Downloads/Connector-ODBC/5.3/mysql-connector-odbc-5.3.4-winx64.msi

Downoading the MySQL
http://cdn.mysql.com/Downloads/MySQL-5.6/mysql-5.6.26-winx64.zip

c:\mysql>cd bin
c:\mysql\bin>mysqld --install
Service successfully installed.

Go to Services and start the Mysql Services.

c:\mysql\bin>mysql -u root -p
>>No password is needed for first time

Set the root Password
=====================
mysql>
mysql> UPDATE mysql.user SET password=PASSWORD('redhat') WHERE user='root';
Query OK, 3 rows affected (0.00 sec)
Rows matched: 3  Changed: 3  Warnings: 0

mysql> FLUSH PRIVILEGES;
Query OK, 0 rows affected (0.00 sec)

mysql> select user,host from mysql.user;
+------+-----------+
| user | host      |
+------+-----------+
| root | 127.0.0.1 |
| root | ::1       |
|      | localhost |
| root | localhost |
+------+-----------+
4 rows in set (0.00 sec)


mysql> delete from mysql.user where user='';
Query OK, 1 row affected (0.00 sec)

mysql> select user,host from mysql.user;
+------+-----------+
| user | host      |
+------+-----------+
| root | 127.0.0.1 |
| root | ::1       |
| root | localhost |
+------+-----------+
3 rows in set (0.00 sec)


mysql> create database fileserver;
Query OK, 1 row affected (0.01 sec)

mysql>GRANT ALL PRIVILEGES ON fileserver.* TO 'fileserver'@'localhost' IDENTIFIED BY 'fileserver';
Query OK, 0 rows affected (0.02 sec)

mysql> flush privileges;
Query OK, 0 rows affected (0.02 sec)

mysql>

Wednesday, August 12, 2015

Mysql Cluster Using Mysql NDB


Mysql Cluster using NDB(Network DataBase) provides a self healing mysql Cluster which provides a good performance. Mainly the Mysql Cluster Contains 3 Components ie using Management , SQL and Data parts. 

Here we will be configuring two Management and two Data/SQL (together in One server) for the HA. Once the configuration is completed we will have two end points to connect to te database so we need to keep an Load balancer in front of the SQL end points.




OS used is RHEL7
Selinux Enabed
Firewall Disabled

Management Server## Perform the Following steps in both the Management Server's. 

Install Needed Packages 
=================
yum install glibc.i686  ncurses-libs.i686 libstdc++.i686 libgcc.i686 -y


Make Directories and Download the Cluster Files
====================================

mkdir /usr/src/mysql-mgm
cd /usr/src/mysql-mgm
wget http://cdn.mysql.com/Downloads/MySQL-Cluster-7.4/mysql-cluster-gpl-7.4.7-linux-glibc2.5-i686.tar.gz
tar zxvf mysql-cluster-gpl-7.4.7-linux-glibc2.5-i686.tar.gz

cd mysql-cluster-gpl-7.4.7-linux-glibc2.5-i686
cp bin/ndb_mgm* /usr/bin/
chmod 755 /usr/bin/ndb_mgm*


mkdir /var/lib/mysql-cluster
vi /var/lib/mysql-cluster/config.ini
==========================================
[NDBD DEFAULT]
NoOfReplicas=2
DataMemory=80M
IndexMemory=18M
[MYSQLD DEFAULT]

[NDB_MGMD DEFAULT]
DataDir=/var/lib/mysql-cluster
[TCP DEFAULT]

# Section for the cluster management node
[NDB_MGMD]
NodeId=1
# IP address of the first management node (this system)
HostName=192.168.70.130

[NDB_MGMD]
NodeId=2
#IP address of the second management node
HostName=192.168.70.131

# Section for the storage nodes
[NDBD]
# IP address of the first storage node
HostName=192.168.70.132
DataDir= /var/lib/mysql-cluster
[NDBD]
# IP address of the second storage node
HostName=192.168.70.133
DataDir=/var/lib/mysql-cluster
# one [MYSQLD] per storage node
[MYSQLD]
[MYSQLD]
==========================================

chown mysql. /var/lib/mysql-cluster -R

To start the Management Service
========================
ndb_mgmd -f /var/lib/mysql-cluster/config.ini --configdir=/var/lib/mysql-cluster/

Data And SQL Server#Perform this on both of the Server's
==============================================

Install the needed Packages
====================
yum install libaio.i686 libaio-devel.i686 -y
yum install perl -y
yum -y install perl-Data-Dumper

Download the packages
cd /usr/local/
wget http://cdn.mysql.com/Downloads/MySQL-Cluster-7.4/mysql-cluster-gpl-7.4.7-linux-glibc2.5-i686.tar.gz
tar zxvf mysql-cluster-gpl-7.4.7-linux-glibc2.5-i686.tar.gz
mv /root/mysql-cluster-gpl-7.4.7-linux-glibc2.5-i686.tar.gz mysql
chown mysql. mysql -R
cd mysql

Initializing the database
scripts/mysql_install_db --user=mysql --datadir=/usr/local/mysql/data

cp support-files/mysql.server /etc/init.d/
chmod 755 /etc/init.d/mysql.server

cd /usr/local/mysql/bin
mv * /usr/bin
cd ../

vi /etc/my.cnf
============
[mysqld]
ndbcluster
# IP address of the cluster management node
ndb-connectstring=192.168.70.130,192.168.70.131
[mysql_cluster]
# IP address of the cluster management node
ndb-connectstring=192.168.70.130,192.168.70.131
============

mkdir /var/lib/mysql-cluster

cd /var/lib/mysql-cluster
ndbd --initial
/etc/init.d/mysql.server start

After this, secure the MySQL installation by running the appropriate script:

/usr/local/mysql/bin/mysql_secure_installation


Testing 
In the Management Node check the command ndb_mgm and check the status